Industrial Strength Utility Cart

Description

Industrial Strength Utility Cart. Condition is "New".
This heavy duty
USA Made Utility Cart
is manufactured in Ohio, the heartland of America.
The cart has heavy duty wheels for garage or shop mobility and can carry up to 250 lbs.
Great for tools, parts, or just about anything that needs to move around the shop.
C
an even handle your morning cup of coffee!
Parts included:
2 shelves, 2 end handles, 2 stationary wheels, 2 caster wheels, (16) 1/4" bolts, (16) 5/16" bolts
Tools Needed:
(2) 1/2" wrenches and (2) 7/16" wrenches
DIRECTIONS FOR PUTTING TOGETHER BLACK MECHANIC CART:
Step 1:
Make sure screws are on tight
Step 2:
Place handle end piece to bottom tray (notched end will be faced outward)
Step 3:
Stick the long bolts (1/4" bolts) through holes and install nuts
Put them on hand tight until all shelves have been installed – this makes it easier to get the other ones on
Step 4:
Then put the other handle on the other side as shown below
Step 5:
Repeat exact process to other side
Step 6:
After attaching the other side all 16 bolts can be tightened
Step 7:
After bolts have been tightened lay cart back down on its side
Step 8:
Then get the 2 caster wheels and 2 stationary wheels out – install both casters at the same end of the cart (1/2" heads)
Step 9:
Hold caster and put bolt and nut it and tighten
Step 10:
Then put stationary wheels on other side and install bolts/nuts and tighten
Step 11:
Double check everything is tight and then you are done
Quality. Safety. Strength.