Oil Hydraulic Eni Oso 32 Length KG 18 (Oil For Systems Hydraulic)

Description

Oil Hydraulic Eni Oso 32 Length KG 18 (Oil For Systems Hydraulic)
The description of this item has been automatically translated. If you have any questions, please feel free to contact us.
AGIP OSO are high quality lubricants designed to be used as functional fluids in hydraulic systems and systems of all kinds. They are formulated with highly refined paraffinic bases with additives according to the "low zinc" technology in order to obtain excellent thermal, oxidative and hydrolytic stability.
The products are available in numerous viscosity grades capable of satisfying all practical use requirements. (OSO 15 and 22 ISO-L-FD classification; OSO 22-150 ISO-L-HM classification).
PROPERTY AND PERFORMANCE
The AGIP OSO in addition to allowing the transmission of energy in systems that require their use as functional fluids also provide for the lubrication of all the moving parts present in the hydraulic circuit itself. They create a film of lubricant resistant to the considerable stresses that occur between the sliding surfaces, especially in the most stressed parts of high hydrostatic pressure hydraulic systems.
AGIP OSO have remarkable anti-wear properties as highlighted by the results of the technological tests: o the wear of the vanes and the Vickers pump ring is around 35 mg; o the 12th stage in the FZG test is passed from the higher grades (OSO 46 - 150) and the 11th stage from the lower grades.
They are endowed with excellent resistance to oxidation and aging even when subjected to considerable thermal stresses: therefore they counteract the formation of sludge and deposits, avoid the clogging of ducts, valves and regulation organs, maintain adequate fluidity, maintenance costs and can be kept in operation for a long time.
AGIP OSO also have a high thermal stability allowing their use in compact (closed) circuits operating at high temperatures and high pressures without causing deposits.
The high hydrolytic stability minimizes the formation of sludge and corrosive phenomena in the presence of water.
The high viscosity index of all grades of AGIP OSO has the effect of minimizing changes in oil viscosity as the operating temperature varies. Their use therefore guarantees constant performance and pressure drops and protection against possible cavitation phenomena.
The products are characterized by a low pour point which allows the easy start-up of the hydraulic systems even at low ambient temperatures without the occurrence of circulation and regulation problems.
The particular anti-corrosive and anti-rust power of AGIP OSO prevents oxidation of the internal surfaces of the circuits and avoids operating problems and oil degradation due to the metal oxides that would form inside the circuits themselves.
The remarkable demulsiveness of the products opposes the formation of stable emulsions between the oil itself and the water coming from leaks or condensations and prevents the consequent degradation of the lubricating and anticorrosive properties of the hydraulic fluid.
The relevant antifoam properties and the ability to release the retained air prevent operating problems of the pumps and other components due to flow irregularities and other problems caused by the compressibility of the air bubbles.
They are characterized by a very high filterability capacity and allow the use, in hydraulic circuits, of very narrow porosity filters (3 microns up to ISO 68 grading).
APPLICATIONS
AGIP OSO are suitable for use in hydrodynamic energy transmission systems, hydraulic controls and hydrostatic systems, equipment widespread in all fields of technology, from transport to the construction, mining, chemical and metallurgical industries, to mechanical processing, to the navy, the air force, etc ... Given the great influence of viscosity on the performance of hydraulic systems, the choice between the numerous grades available must be made basically on the basis of the manufacturers' prescriptions. As a purely indicative, it can be said that, in addition to the considerations relating to the thermal operating conditions, the more fluid gradations are generally used in plants where high speeds occur and in precision equipment, while the more viscous grades are used in plants in such as low speeds and high hydrostatic pressures. The use of AGIP OSO is recommended not only as a hydraulic fluid, but also as a lubricant for those demanding applications (bearings, reducers, etc.) whose operating requirements can be satisfied by their particular anti-wear characteristics, or in those cases in which is convenient in relation to the need for unification within an entire establishment
AGIP OSO are able to meet the needs of the following specifications:
ISO L-FD (OSO 15 and 22)
ISO L-HM (OSO 22-150)
ISO 11158
AFNOR NF E 48603 HM
AISE 127
BS 4231 HSD
CETOP RP 91 H HM
EATON VICKERS I-286-S3
din 51524-2 HLP (2006 edition)
LAMB LANDIS - CINCINNATI P 68, P 69 and P 70 - level
PARKER HANNIFIN (DENISON) HF-0 - level
SAUER-DANFOSS 520L0463 Rev. F.
AGIP OSO have been approved by the following manufacturers:
ATOS Tab. P 002-0 / I
Danieli Standard 0.000.001 Rev. 14 (A01.3.1a - Type 10 AGIP OSO 46; A01.3.1b - Type11 AGIP OSO 68)
HORBIGER HYDRAULIC
LINDE
REXROTH RE 90220-1 / 11.02
ZF TE-ML 12
Delivery takes place by private courier in a maximum of 5 working days, at the customer's home, goods coming directly from ENI factories
PROPERTY AND PERFORMANCE The high hydrolytic stability minimizes the formation of sludge and corrosive phenomena in the presence of water. APPLICATIONS AGIP OSO are able to meet the needs of the following specifications: ISO L-FD (OSO 15 and 22) ISO L-HM (OSO 22-150) ISO 11158 AFNOR NF E 48603 HM AISE 127 BS 4231 HSD CETOP RP 91 H HM EATON VICKERS I-286-S3 din 51524-2 HLP (2006 edition) LAMB LANDIS - CINCINNATI P 68, P 69 and P 70 - level PARKER HANNIFIN (DENISON) HF-0 - level SAUER-DANFOSS 520L0463 Rev. F. AGIP OSO have been approved by the following manufacturers: ATOS Tab. P 002-0 / I Danieli Standard 0.000.001 Rev. 14 (A01.3.1a - Type 10 AGIP OSO 46; A01.3.1b - Type11 AGIP OSO 68) HORBIGER HYDRAULIC LINDE REXROTH RE 90220-1 / 11.02 ZF TE-ML 12 Delivery takes place
PROPERTY AND PERFORMANCE The high hydrolytic stability minimizes the formation of sludge and corrosive phenomena in the presence of water. APPLICATIONS AGIP OSO are able to meet the needs of the following specifications: ISO L-FD (OSO 15 and 22) ISO L-HM (OSO 22-150) ISO 11158 AFNOR NF E 48603 HM AISE 127 BS 4231 HSD CETOP RP 91 H HM EATON VICKERS I-286-S3 din 51524-2 HLP (2006 edition) LAMB LANDIS - CINCINNATI P 68, P 69 and P 70 - level PARKER HANNIFIN (DENISON) HF-0 - level SAUER-DANFOSS 520L0463 Rev. F. AGIP OSO have been approved by the following manufacturers: ATOS Tab. P 002-0 / I Danieli Standard 0.000.001 Rev. 14 (A01.3.1a - Type 10 AGIP OSO 46; A01.3.1b - Type11 AGIP OSO 68) HORBIGER HYDRAULIC LINDE REXROTH RE 90220-1 / 11.02 ZF TE-ML 12 Delivery takes place
PROPERTY AND PERFORMANCE The high hydrolytic stability minimizes the formation of sludge and corrosive phenomena in the presence of water. APPLICATIONS AGIP OSO are able to meet the needs of the following specifications: ISO L-FD (OSO 15 and 22) ISO L-HM (OSO 22-150) ISO 11158 AFNOR NF E 48603 HM AISE 127 BS 4231 HSD CETOP RP 91 H HM EATON VICKERS I-286-S3 din 51524-2 HLP (2006 edition) LAMB LANDIS - CINCINNATI P 68, P 69 and P 70 - level PARKER HANNIFIN (DENISON) HF-0 - level SAUER-DANFOSS 520L0463 Rev. F. AGIP OSO have been approved by the following manufacturers: ATOS Tab. P 002-0 / I Danieli Standard 0.000.001 Rev. 14 (A01.3.1a - Type 10 AGIP OSO 46; A01.3.1b - Type11 AGIP OSO 68) HORBIGER HYDRAULIC LINDE REXROTH RE 90220-1 / 11.02 ZF TE-ML 12 Delivery takes place
MPN
230340
Marca
Eni