Particle Measuring Systems PMS CLS-700 T Chemical Liquid Particle Counter

Description

Particle Measuring Systems CLS-700 T Corrosive Liquid Particle Counter / Sampler
Comes with what you see in the pictures. If you don't see it, you probably wont get it.
Specifications are from Particle Measuring Systems and may vary slightly due to upgrades, options, or revisions this unit may or may not have.
The unit was Intel surplus and removed from a cart. It powers up and the status light flashes on and off (the green light). It does not provide any errors. It seems to be in functioning condition. There are various scratches on the plastic. It is sold as-is.
List Price is:
,700.00 to ,500.00 from Particle Measuring Systems
The Unit's Serial Number Tag Reads:
Model Number:
CLS-700-(1)
Serial Number:
33185-0395-75
Power Requirements:
85 - 125 VAC, 50/60 Hz, 1.5 A
Sensor Type:
Liquilaz SO2 HF NO 99
Description:
The CLS-700 T corrosive liquid sampler is a compression sampler combined with a LiQuilaz liquid particle counter for effective measurement of particles in fluids contained in unpressurized vessels. It is ideally suited for testing effervescent chemicals. The system eliminates bubbles by pressurizing the sample and forcing the bubbles into solution.
The CLS-700 T corrosive liquid sampler can be integrated into a wet bench for continuous particle monitoring, or located on a cart for increased mobility. When integrated into the wet bench, the sampling system can be started or stopped by the tool, including automatic shut-off during a bath change, to prevent the injection of chemical foam or air into the particle counter. The CLS-700 T corrosive liquid sampler is fully compliant with SEMI C1 for particle measurement of process chemicals.
Benefits:
Cost Reduction:
50 or 80 mL/min. flow rate and 100% view volume means quicker process qualification
Real-time characterization and analysis for immediate response to anomalies means less waste
Versatility:
Supports a wide range of applications and fluids
Programmable particle-size thresholds
Designed for easy mobility
Compression sampling allows instrument to measure most chemicals, including effervescent ones
External trigger coordinates sampling with process events
Measurements can be made directly out of the bath
Easy to Use:
Facility Net process control software simplifies online sampling by providing alphanumeric paging, sensor status, tabular and SPC charts, and time plots
SamplerSight batch sampling software facilitates all aspects of data management, including sophisticated data storage, retrieval, and report generation
Designed for quick cleanup when switching from one chemical to another
Applications:
Particle level measurement in effervescent liquids
Wet process monitoring
Chemical process control
Bath monitoring
Main Specifications:
Burette Volume:
65 mL nominal
Assessed Volume:
48 mL nominal
Maximum Compression Pressure:
60 psi at 120°C or less; max. 45 psi at 150°C
Exterior Surface:
Polypropylene (Meets flame retardant specification FM4910.)
Wetted Surface Materials:
Kalrez 4079, Teflon, Kel-F (See LiQuilaz particle counter information for other wetted surfaces.)
Sample Temperature:
10 - 150°C at 45 psi or less (maximum 120°C at 60 psi); Sulfuric acid 100°C maximum
Dimensions:
16" L x 10" W x 16" H (41 cm x 26 cm x 39 cm)
Weight:
34 lbs. (15.5 kg.)
Communications:
RS-232 or RS-485
Environment:
Temperature:
10 - 35°C
Humidity:
non-condensing
Software:
SampleSight, Facility Net (provided by the factory)
Sampling:
Optionally controlled via external trigger
Factory Requirements:
Power:
See sensor requirements.
Gas Pressure:
70 - 150 psi
Liquid Connections:
Flaretek 1/4"
Sensor Specifications:
Size Range:
0.2 - 2.0 µm
Channels:
15
Flow Rate:
50 mL/min. ±10%
Sample Volume:
Volumetric 50 mL/min. (100%)
Maximum Concentration:
10,000 particles/mL
Sample Temperature:
10 - 150°C (max. 150°C at 45 psi, 120°C at 60 psi); Sulfuric acid 100°C max.
Maximum Pressure:
100 psi
Zero Count:
< 1 count/mL
Wetted Surface Materials:
Sapphire, Teflon, Kel-F, Kalrez 4079
Laser Source:
Laser diode
Dimensions:
13" L x 4" W x 5" H (32 x 11 x 11 cm); mounts inside the CLS-700 T
Weight:
6 lbs. (2.7 kg)
Power:
85 - 132 V or 220 - 240 V, 50/60 Hz
Communications:
RS-485
For Domestic Customers: Packaging, handling, and order processing included in shipping in all domestic shipments as quoted by the shipping calculator. For International Customers there is a .00 minimum for packaging, handling, and order processing. International shipping to be determined by destination.
Prior to shipment I will need to know the following information (filled out on a form that I will send you) for International Customers or Packages/Freight being Forwarded internationally. International customers may also be subject to a freight forwarder form if applicable.:
(1) Are you the end-user of this item?
(2) If you are not the ultimate end-user of the item, please state the ultimate end user's name.
(3) What is the ultimate country destination?
05/26/09